october 2010 www.winchesterelectronics.com winchester electronics presents... el series optical fiber patch cords the expanded light din connect patch cord is similar in function to the traditional bnc to bnc installed copper wiring terminated to the rear of a copper jackfeld. this patch cord has an el-din connector on one end and an industry standard lc, sc, fc, st, (or any single or multi-mode) fber connector on the other end. the el-din connector end is attached to the rear of the el-video jack and the kevlar reinforced fber is routed to the termination point at the router, or traditional fber distribution frame. the expanded light quick connect (el-qc) is similar in function to a copper video patch cord. with the el-qc connector on either end of a 5mm bend-insensitive rugged fber , when inserted into the front of the el optical fiber video jack, it will automatically switch the optical signal being routed through the back of the video jack to the front connectors. patents pending product benefits expanded light beam connection scheme eliminates issues with dirt and scratches common with single-mode and multi-mode fber connections. non contact optical connection eliminates deterioration of insertion and return loss over matings; no cleaning required. rugged cable jacket offers same physical usage characteristics as copper. kevlar reinforcement provides high pull strength. bend-insensitive fber allows for small bend radius without any increased insertion loss. fiber connection is signal agnostic allowing video, data, audio, internet protocol, analog, or any other signal to be transmitted. front push/pull connection allows easy insertion and withdrawal. components made of high-strength stainless steel. coated optics for low loss connections.
62 barnes industrial road north wallingford, ct 06492 phone: (203) 741-5400 ? fax: (203) 741-5500 customer service (803) 909-5000 connecting innovation to application ? patents pending the expanded light patch cords provide a new way to route broadcast signals over optical fber. eliminating issues associated with single mode ferrule-based connections, the el patch cords, combined with the el optical fiber video jack (el-vj), provide a rugged and reliable way to carry, monitor, and route your high-speed signals. totally signal agnostic, the fber video jack is equally adept at carrying hdtv, sdi, ethernet ip, analog video, or any other data format, at whatever data rate your transmit/receive system can deliver. with a workfow carried directly from the proven copper jackfeld and patch cord routing methodology, the expanded light system is totally passive, and provides a single-mode expanded beam connector system with excellent reliability and optical performance. insertion loss normal 1.5 db typical insertion loss patched 1.5 db typical return loss 55 db typical 45 db minimum optical patch cord mates 10,000 cycles withdrawal force ( patch cord ) 5 lbs. minimum pull force ( rear side ) 20 lbs. minimum mechanical body high strength stainless steel optical alignment pin high strength stainless steel aterial description part number el din? removal tool 107-1505 el series? bare fiber cable assembly pigtail 776r-716-394014 el series? din-sc fiber optic cable assembly (3m) 776l-700-118014 el series? din-lc fiber optic cable assembly (3m) 776l-704-118014 el series? din-fc sm fiber optic cable assembly (3m) 776l-710-118014 el series? din-st fiber optic cable assembly (3m) 776l-712-118014 singlemode el to el patch cable w/5mm 9 / 125 blue cable (3m) 776L-776-118016 note: any length available - please contact sales for assistance.
|
